MS-Tech G-Codes for CNC Lathes and Turning Centers – MS-Tech Corporation
MS-Tech G-Codes for CNC Lathes and Turning Centers

G-Codes

Description

Group No.

G00*  Rapid positioning  01 
G01  Linear interpolation  01 
G02  Circular interpolation CW  01 
G03  Circular interpolation CCW  01 
G04  Dwell, Exact stop  00 
     
G10  Programmable data input  00 
G11*  Programmable data input cancel  00 
G17  XY plane selection if applicable  02 
G18*  ZX plane selection  02 
G19  YZ plane selection if applicable  02 
     
G20  Select inch unit  06 
G21  Select metric unit in mm  06 
G27  Reference point return check  00 
G28  Return to reference point  00 
G29  Return from reference point  00 
G30  Return to 2nd reference point  00 
G33  Thread Cutting  01 
G37  Automatic offset measurement  00 
     
G40*  Cutter compensation cancel  07 
G41  Cutter compensation left  07 
G42  Cutter compensation right  07 
     
G50.1  Mirror image cancel  18 
G51.1  Mirror image on  18 
G52  Local coordinate system setting  00 
G53  Positioning in machine coordinate  00 
     
G54*  Work coordinate system 1 select  14 
G55  Work coordinate system 2 select  14 
G56  Work coordinate system 3 select  14 
G57  Work coordinate system 4 select  14 
G58  Work coordinate system 5 select  14 
G59  Work coordinate system 6 select  14 
     
G68  Turret image on  04 
G69*  Turret image off  04 
     
G70  Finishing cutting cycles  00 
G71  Stock removal in turning  00 
G72  Stock removal in facing  00 
G73  Pattern repeating cycle  00 
G74  End face peck drilling  00 
G75  Outer/Internal diameter drilling  00 
G76  Multiple threading cycle  00 
     
G77  Internal/External cutting cycle  01 
G78  Thread cutting cycle  01 
G79  Face cutting cycle  01 
     
G80*  Canned cycle cancel  09 
G83  Face drilling cycle  09 
G84  Face tapping cycle  09 
G85  Face boring cycle  09 
G87  Side drilling cycle  09 
G88  Side tapping cycle  09 
G89  Side boring cycle  09 
     
G90*  Select absolute command  03 
G91  Select incremental command  03 
G92  Programming of absolute zero point  00 
G94  Per minute feed  05 
G95*  Per revolution feed  05 
     
G96  Constant surface speed control on  13 
G97*  Constant surface speed control off  13 
G98*  Return to initial point in canned cycle  10 
G99  Return to R point in canned cycle  10

 

Notes:
  1. G-codes ending with a star [*] is of power-on default.
  2. If you cannot find MS-Tech Control listed in your CAM software, please select as Fanuc 0T instead.
  3. The G-codes are of Set B for turning type machines. MS-Tech CNC also supports Set A and Set C, depending on parameter settings.